JW Yard Sale @ www.villiers.info

Crankcases, gearbox shells, gearbox internals, primary covers

After more than 30 years of racing and building Villiers, I am retired and time for new owners.
Items are clean/aquablaster or garage grubby or as raced dirty.
Some of these items will also be going through Ebay, so will disappear as sold.
Smaller/lighter stuff I will post to UK at your cost, else collect from Birmingham South, else DPD courier.
Contact via mailto : click here to use your own email client
Last updated 18 April 2020

9E/32A standard 4speed clusters with or without barrel selector
Cluster GBP 60 or GBP 85 with selectors
id=GB2

id=GB3

id=GB4

id=GB5

32A central plug head - Various combustion chambers GBP 12
id=HD32a
id=HD32b
id=HD32c
id=HD32d
id=HD32e
id=HD32f

I have a selection of gearbox castings, of various styles, that could be matched to these. Most have outer covers.
Yet to be photographed.
9E/32A crankcase
gb mounting lug intact
id=ccM86
GBP 50
9E/32A crankcase
gb mounting lug repaired
crankcase stuffers
id=ccE24
GBP 50
9E/32A crankcase
gb mounting lug repaired
id=ccH86
GBP 50

9E/32A inner primary drive cover
id=pc1
GBP 15
cut for air flow, threads good
9E/32A inner primary drive cover
id=pc2
GBP 20
sprocket hole cut to allow casing to be taken off without disturbing sprocket
9E/32A inner primary drive cover
id=pc3
GBP 20
drain holes welded up, fixing hole welded over
but best of the 3 as standard and just needs a linish

9E/32A clutch friction plates
set of four, all fibre plates
id=pr1
GBP 10

9E/32A trials crank weights
Improves bottom end pull
id=pr2
GBP 10